How to sync the time of your ControlFreq device...

How to sync the time of your ControlFreq device...


Introduction

All ControlFreq devices have features that relate directly to the current date and time. 

Without the correct time/date setting, time-related functionalities will not operate correctly. Some newer firmwware versions automatically update the time and date when the clocks change however on some occasions, and with older firmware versions, it may not update.

On these occasions you can prompt the device to update to match the network time & date by sending a few simple SMS text messages to the SIM card phone number in your ControlFreq device.

Follow these simple steps:



    • Related Articles

    • SPEAK-4G

      Getting Started This guide is a simple overview of the only features Call the SIM card phone number of the SPEAK-4G, from any phone, to connect the loudspeaker audio automatically. There is nothing to press to start or end the audio. SPEAK-4G answers ...
    • SOLO-4G | GSM Intercom [1, 2 or 4 way door entry]

      INTERCOM CONNECTION LOCK WIRING Electric gates, barries, shutters (apply volt-free open command to 3rd party logic controller) Electric latch (12V applied to latch via the N/O relay) Magnetic lock (12V removed through N/C relay to drop power off the ...
    • PRO+4G | Getting Started Guide

      What does it do? The PRO+4G can be used for alarm event & condition monitoring using the oboard alarm inputs (4). There are also 12V transistor outputs (4) to drive control functions or switch 12V relays (not included) for volt-free relay control. 1. ...